RECON SPARES

AMUL HYDRULIC JACK

FILL THE FORM WITH YOUR    REQUIREMENTS 
1. Out side diameter of    the pipe (O.D.)		
2. Inside diameter of the pipe (I.D.)		
3. Length of the Pipe Only			
4. Close Length of the Cylinder 			
5. Open Length of the Cylinder 			
6. Stroke of the Cylinder 			
7. Ram Outside Diameter (O.D.)			
8. Chrome Thickness, As you need (in micron)	
9. Hardening in ram, If require (how much)		
10. Your cylinder double acting or single acting	
11. How many stage in the cylinder 		
12. How much pressure increase in the cylinder	
13. What is the puressure of the cylinder		
14. How many working strokes of the cylinder	
     Per day(approx)   
15. Pin eye to the bottom side			
16. Pin eye to the ram side			
17. Connection of the port (BSP)			
Contact Details Name: eMail: Phone: So fill above instructions watchfully after this whole process we will give you final rates.